Sigelei Fuchai 213 Box Mod

Sigelei is proud to introduce their next step in vaping technology, the Sigelei Fuchai 213 Temperature Control Mod. The Fuchai 213 now utilizes Celsius based TCR calculation for accuracy, and features an aluminum alloy construction for a smooth and comfortable grip. With the beautiful aluminum finish, improved TCR mode, increased wattage output and the expanded temperature control modes; the Sigelei Fuchai 213 TC Mod is designed for the cloud chasing enthusiast!

• Sigelei Fuchai 213:
  Size: 88*44*29mm
  Material: Carbon fiber & Zinc Alloy
  Screen: 0.91〞OLED
  Wattage Range: 10w-213W
  Temperature Range: 100℃-300℃/200℉-570℉
  Input Voltage: 6.4V-8.4V
  Output Voltage: 1.0V-7.5V
  Output Max Current: 35A
  Battery: 2*18650 (sold separately here)
  Operating Mode: POWER/SS/TI/NI200/TCR/TFR
  Resistance Range: 0.1Ω-3.0Ω
  Coils: Kanthal/TI/NI 200/ SS(304/316/317)TCR/TFR
  USB: DC 5V/2A
  
  Locking/Unlocking your Battery:
  Your battery will come to you locked. This features protects your e-cigarette from unwanted use when being stored in a purse or pocket, for instance. We encourage you to store your e-cig in a protective lanyard or carrying case. To lock or unlock your battery, simply press the activation button of your battery 5 times fast.
  
  Charging your Battery:
  Your batteries will typically come 50% charged. We recommend using your batteries until they are fully drained (dead) before charging them the first time. Normally, your batteries will only take a few hours to fully charge; we recommend allowing them to charge for a full 8 hours the first time.
  
  To charge your 18650 batteries, remove from your Tesla box mod and place in an 18650 charger. We offer a variety of 18650 chargers here. You can also charge your box mod by plugging it into the designated USB cord.
  
  LED Screen:
  The LED screen will display your battery's charge, temperature, wattage and atomizer resistance!
  
  Switching between Wattage and Temp Control:
  Press the activation button three times to toggle between wattage, Nickle (Ni) temp control, and Titanium (Ti) temp control. Use the arrow keys to adjust up or down.
  
  Short Circuit Protection:
  If there is a short in your heating element, your LED screen will read "atomizer short".
  
  Overcharge Protection:
  Once charged, your battery will turn itself off in order to prevent being overcharged.
  
  10 Second Cut-Off:
  If your activation button is held down for more than 10 seconds your battery will deactivate to prevent your atomizer from burning out.

• It is possible for the pad of your battery to get pushed down too far; this will restrict it from making contact with your tank, and therefore you will not get a good draw from your e-cig. To fix this, you can take a pair of tweezers and gently lift the pin upward which will allow it to make contact.

• It is normal to find a small trace of liquid in the battery contact area when removing the tank. We recommend cleaning the contacts of the battery before putting it in your charger.