Kanger Replacement Coil

• Changing your Bottom Dual Coil (BDC) Atomizer:
  Your atomizer coils have an average lifespan between 5 - 15 days (depending on your vaping habits). When the atomizer coil wears down, it may begin to leak, taste burnt or be hard to draw from.
  
  To change your atomizer coil:
  1. Hold the clearomizer upside down.
  2. Unthread the metal base from the clearomizer, and set the clearomizer aside.
  3. Unthread the atomizer from the metal base, and discard.
  4. Before attaching a new atomizer, we recommend priming the wicks by adding a single drop of V-lixir to each wick (the wick is the polyfil poking out on both sides of the atomizer). This helps prevent your atomizer from burning our prematurely.
  5. Thread the new atomizer into the metal base.
  6. Thread the base back onto the clearomizer, and begin using!
  

� The metal tube in the center of the clearomizer leads from the mouthpiece to the battery end. Avoid getting any V-Lixir in this tube when filling the clearomizer.

� Gurgling noise or leaks: This is a sign that the V-Lixir has found its way into the metal tube in the center of the clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the clearomizer, remove it from the battery, wrap a cloth or tissue around the bottom of the clearomizer and blow through the mouthpiece through the metal tube.

� The atomizer coil can unfasten when unthreading the tube or base. Always secure the atomizer coil before reinstalling the base.

� When possible, keep the clearomizer full and never below one third full of V-Lixir. This helps maintain the seal in the clearomizer and prevent leaks.